Display Link-Flap Protection - H3C IE4300 Command Reference Manual

Field
InErrs
OutErrs
Overflow: More than 7 digits.
--: Not supported.
Related commands
flow-interval

display link-flap protection

Use
display link-flap protection
an interface.
Syntax
display
[ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type
command displays information about link flapping protection on all interfaces.
interface-number
command displays information about link flapping protection on all interfaces of the specified type.
Examples
# Display information about link flapping protection on all interfaces.
<Sysname> display link-flap protection
Link-flap protection: Enabled
Interface
GE1/0/1
GE1/0/2
Table 7 Command output
Field
Link-flap protection
Link-flap
Description
bandwidth. To set the statistics polling interval, use the
flow-interval
Number of error packets received.
Number of error packets sent.
The data length of a statistical item value is greater than 7 decimal digits.
A hyphen (-) indicates that the corresponding statistical item is not
supported.
link-flap protection
: Specifies an interface type. If you do not specify an interface type, the
: Specifies an interface number. If you do not specify an interface number, the
Link-flap Status
Enabled Down
Disabled N/A
Description
Status of global link flapping protection:
•
Enabled—Link flapping protection is enabled globally.
•
Disabled—Link flapping protection is disabled globally.
Status of link flapping protection on an interface:
command.
to display information about link flapping protection on
[ interface
Interval Threshold
10 5
-- --
21
interface-type