Display Counters Rate - H3C IE4300 Command Reference Manual

<Sysname> display counters inbound interface
Interface
GE1/0/1
GE1/0/2
Overflow: More than 14 digits (7 digits for column "Err").
--: Not supported.
Table 1 Command output
Field
Interface
Total (pkts)
Broadcast (pkts)
Multicast (pkts)
Err (pkts)
Overflow: More than 14
digits (7 digits for column
"Err")
--: Not supported
Related commands
reset counters interface

display counters rate

Use
display counters rate
recent statistics polling interval.
Syntax
display counters rate { inbound | outbound } interface [ interface-type
[ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound : Displays inbound traffic rate statistics.
outbound
interface-type
interface-number
Usage guidelines
If you do not specify an interface type, this command displays traffic rate statistics for all up
interfaces that have traffic counters.
Total (pkts)
Overflow
Description
Abbreviated interface name.
Total number of packets received or sent through the interface.
Total number of broadcast packets received or sent through the interface.
Total number of multicast packets received or sent through the interface.
Total number of error packets received or sent through the interface.
The command displays Overflow when any of the following conditions exist:
•
•
The statistical item is not supported.
: Displays outbound traffic rate statistics.
: Specifies an interface type.
: Specifies an interface number.
Broadcast (pkts)
100
Overflow
The data length of an Err field value is greater than 7 decimal digits.
The data length of a non-Err field value is greater than 14 decimal digits.
to display traffic rate statistics for interfaces in up state for the most
7
Multicast (pkts)
100
Overflow
Err (pkts)
0 0
Overflow