Acquisition Of The Service File - Mitsubishi Electric NZ2FTGN User Manual

■Procedure for Multiple update
In Multiple update, multiple firmware files of the coupler and I/O module can be selected and updated simultaneously.
1.
Click [Firmware] on the menu bar.
2.
Click the [Click here] button of "For multi-update" on the "Single Update" window. The language file can also be replaced
at the same time when the [Select firmware /language file] button is selected.
3.
Select an update file.
Repeat the operation for every update.
4.
When the [Update now] button is clicked, BF LED flashes in red and the update is performed.
5.
Click the [Reset] button displayed after the update is complete.
The coupler is reset and the Web server starts. Flashing of the BF LED in red will stop.
Precautions
After the update is complete, check that the version is upgraded in "General information" of "Component view".

Acquisition of the service file

If troubleshooting does not resolve the problem, acquire a service file from the coupler to provide the service technician with
the information about the problem.
Acquisition method
The following describes how to acquire the service file.
1.
Select "Save service file" from the [Extras] menu.
2.
Select the save destination of the service file on the personal computer, and click [Save]. (The file name cannot be
specified.)
Precautions
The service file in the coupler is deleted by the following operations.
• At power-off
• At the completion of the acquisition of the service file
• When the [Cancel] button is clicked while the service file is being acquired
• When the Web server is closed while the service file is being acquired
4 WEB SERVER
88
4.3 Functions to Set on the Web Server