Force Mode - Mitsubishi Electric NZ2FTGN User Manual

Force mode

This mode forcibly changes the input/output values at any time without being affected by the input from an external device or
the operation result (cyclic data) of the program.
The following cannot be performed during Force mode.
• Changing coupler parameters by the Web server
• Changing NZ2FT-EIP parameters by UCMM communication
• Operation of functions that require login by the Web server started on another personal computer (
Page 64 Functions that require login)
The NZ2FT-C24 does not support Force mode.
Operating procedure
1.
Select "Enable" from the [Force] menu.
The "Login" window is displayed when the user does not log in. ( Page 64 Login/Logout)
2.
A caution window will be displayed. Click the [Start force mode] button to switch to Force mode.
The SF LED flashes in red during Force mode. (For the NZ2FT-GN, the SF LED and ERR. LED flash in red during Force
mode.)
3.
Change Process data of the channel of the I/O module.
Process data of the channel can be changed in the "Overview" or "Station" window.
4 WEB SERVER
76
4.3 Functions to Set on the Web Server
DO 1 = ON
DI 1 = OFF
DO 1 = OFF
DI 1 = ON