Transmission Speed Auto-Tracking - Mitsubishi Electric NZ2FTGN User Manual

Transmission speed auto-tracking

The transmission speed set by the master station is automatically followed, and the NZ2FT-BT has the same transmission
speed.
Set the NZ2FT-BT parameter "Power up baud rate" to "Auto baud" (default). ( Page 145 Parameter list)
The conditions under which transmission speed auto-tracking operates are as follows. It takes about 5 seconds for the
transmission speed to be confirmed.
• The NZ2FT-BT is powered on.
• The NZ2FT-BT has returned after disconnection.
The transmission speed can be checked during operation from "Current baud rate" on the "Component view" window of the
Web server.
8
8 NZ2FT-BT
137
8.4 Functions