Mitsubishi Electric NZ2FTGN User Manual page 205

Network configuration setting
Set the NZ2FT-PN and I/O module in the "RJ71PN92" tree of the network configuration setting. (Window layout  MELSEC
iQ-R PROFINET IO Controller Module User's Manual (Application))
■NZ2FT-PN
1.
On the [Device Library] tab, right-click either "NZ2FT-PN Profinet Device" or "NZ2FT-PN Profinet Device with Status
Word" and select "Insert in Configuration". ( Page 201 Device Library)
2.
The "NZ2FT-PN Profinet Device" window will be displayed. Set the communication parameters of the NZ2FT-PN on the
[General Configuration] tab.
9 NZ2FT-PN
203
9.6 Parameter Setting
9