Mitsubishi Electric NZ2FTGN User Manual page 241

■Parameters of the NZ2FT-PBV and I/O module
Set the parameters of the NZ2FT-PBV and I/O module on the "Slave Settings" window.
[PROFIBUS Network]  Right click on NZ2FT-PBV  [Slave Settings]
1.
Set the FDL address of the NZ2FT-PBV.
Enter the FDL address set with the rotary switch of the NZ2FT-PBV for "FDL address" on the "Slave Settings" window.
2.
Set the structure of the DP-Slave.
Drag and drop the I/O module to be set from "Available Slave Modules" to "Project Slave Modules".
3.
Set the parameters of the NZ2FT-PBV and I/O module.
Select the NZ2FT-PBV or the I/O module of which parameters are set on "Select module". Set the parameters on displayed
"Module Parameters".
10 NZ2FT-PBV
239
10.6 Parameter Setting
10