Chapter 12 Nz2Ft-Eip; Ethernet/Ip Configuration; Corresponding Master Module And Software Package; Eds File - Mitsubishi Electric NZ2FTGN User Manual

12
NZ2FT-EIP
This chapter describes the details of the EtherNet/IP coupler.
12.1

EtherNet/IP Configuration

An EtherNet/IP system consists of a scanner (master station) with the RJ71EIP91 as the master module (1) and an adapter
(slave station) for the EtherNet/IP device (2).
The NZ2FT system using the NZ2FT-EIP operates as an adapter.
(1)

Corresponding master module and software package

The master module corresponding to the NZ2FT-EIP and the software package corresponding to the master module are
shown.
Master module
Name
EtherNet/IP network interface module
For how to check the version, refer to the manual for each master module and software package.

EDS file

The EDS file for setting the NZ2FT-EIP and I/O modules must be registered in the software package.
The EDS file is included with the EtherNet/IP Configuration Tool for RJ71EIP91.
Registration destination software
package
EtherNet/IP Configuration Tool for RJ71EIP91
(2)
Model Version
RJ71EIP91 Firmware version "01" or later
Name
EtherNet/IP EDS file
Software package
Product name
GX Works3
EtherNet/IP Configuration Tool for
RJ71EIP91
Release file name
NZ2FT-EIP_v[Major version]_[Minor version].eds.zip
([Major version]: 1 to 99, [Minor version]: 0 to 99)
12.1 EtherNet/IP Configuration
12
Version
1.045X or
later
1.00A or later
Version
1.1 or later
12 NZ2FT-EIP
363