Wiring Of Power Cable And I/O Cable - Mitsubishi Electric NZ2FTGN User Manual

Wiring of power cable and I/O cable

The following describes how to connect and disconnect the power cable and I/O cable.
Wiring procedure
■Connection
■Removal
While pushing the open/close button, pull out the bar solderless terminal.
■Fuse installation
A fuse is required for wiring the NZ2FTS2-4A.
Install a 4A slow fuse between the power supply on the live side and the switch.
1.
Check that the external power supply is not on.
2.
Insert the bar solderless terminals into the wire insertion openings.
3.
After the wiring is finished, pull the bar solderless terminal lightly to check that it is clamped
securely.
3 INSTALLATION AND WIRING
3.4 Wiring
3
45