DP alarm mode switching
This function switches the DP alarm mode of PROFIBUS-DP between "V0" and "V1".
Set in the parameter "DP alarm mode" of the software package of the master module.
• When "V0" is set, the alarm trigger is set with the parameter. The parameter "Process alarm" can be set to enable (default)
or disable, and is valid only in V0 mode. The generated Diagnostic messages need not be checked from the DP-Master.
• When "V1" is set, the alarm trigger is set in the engineering environment. The parameter "Process alarm" can be set to
enable (default) or disable, and the setting in V0 mode is invalid. The generated Diagnostic messages must be checked
from the DP-Master.
10 NZ2FT-PBV
232
10.4 Functions