Chapter 3 Installation And Wiring; Installation Environment And Installation Position Of Module; Installation Environment - Mitsubishi Electric NZ2FTGN User Manual

3
INSTALLATION AND WIRING
This chapter describes the installation environment, mounting on the DIN rail, installation of modules, and wiring.
3.1
Installation Environment and Installation Position
of Module

Installation environment

Installation location
Install the module according to the installation environment shown in the general specifications. ( Page 30 General
Specifications).
• Places where the operating ambient temperature is not within the range of general specifications
• Places where the operating ambient humidity is not within the range of general specifications
• Areas where the abrupt temperature change causes condensation
• Areas with corrosive gas or flammable gas
• Areas with much dust, iron powder or any other conductive powder, oil mist, salt, and organic solvent
• Areas subject to direct sunlight
• Areas where strong electric field or strong magnetic field is generated
• Areas where the module is affected by vibration or shock
Installation position and installation orientation
When mounting a module on the control panel, observe the following distances from structures and adjacent modules to
ensure good volatilization and easy module replacement.
■For horizontal installation
40 mm
20 mm
40 mm
3 INSTALLATION AND WIRING
36

3.1 Installation Environment and Installation Position of Module

35 mm
20 mm
10mm