Break-Out Diagram Viewing - Polaris RZR XP Service Manual

ELECTRICAL
14. Remove plastic rivets retaining the rear upper close-
y
off panel and lower close-off panel
15. Remove the front fender flairs.
16. Loosen front left fender to allow harness to pass
through by the fuse box.
17. Remove coolant reservoir bottle fasteners.
18. Disconnect the wiring harness from all sensors and
controls.
19. Removal all harness retaining clips from the chassis.
Refer to Electrical Harness Routing / Retention page
12.44.
20. Remove the harness through the front of the vehicle.
21. Route new harness the same way as the old harness.
Refer to Electrical Harness Routing / Retention page
12.44.
22. Install all previously removed parts and torque
fasteners to specification.

BREAK-OUT DIAGRAM VIEWING

Break-Out Diagrams
The main wiring diagram(s) maybe found in the back of
the paper manual.
Break-Out diagrams for this model may be found in the
online service manual in with the main wiring diagrams.
To access the interactive break-out diagrams:
12.48
1. Open the wiring diagram PDF and open the left side
u
. menu.
2. If the wiring diagram does not open the Adobe
navigation bars, click on the Adobe Icon.
3. Click on the Layers Icon.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.