Roof Installation (Turbo S Only) - Polaris RZR XP Service Manual

11. With the aid of an assistant, lift the cross member with
s
seat belts and align with rear ROPS mounting
brackets.
12. Install M10 x 1.5 x 75 fasteners
f
M10 x 1.5 Nyloc nuts (PN 7520117) to secure the
seat belt cross member to the rear ROPS
assemblies. Torque to specification.
IMPORTANT
Ensure the seat belts are not twisted.
TORQUE
Seat Belt Cross Member Fasteners:
40 ft-lbs (54 Nm)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
13. Install both C-pillar covers
h
d
(PN 7520488) and
torque pattern until no fastener rotation is observed to

ROOF INSTALLATION (TURBO S ONLY)

1. Install the roof brackets
four T-40 Torx fasteners
specification.
g
and T-25 Torx fasteners
. Torque to specification.
TORQUE
C-Pillar Cover Fasteners:
14 in-lbs (2 Nm)
IMPORTANT
Torque all ROPS fasteners using the A - B - A - B
achieve torque specification.
q
(PN 5267751-458) and
w
(PN 7519650). Torque to
TORQUE
Roof Bracket Mounting Fasteners:
8 ft-lbs (11 Nm)
BODY / FRAME
11
11.31