Polaris RZR XP Service Manual page 250

PVT SYSTEM
4. Place the drive clutch holding tool
install the drive clutch on the tool. Install the clutch
y
spider nut tool on the spider nut sleeve
torque the nut to specification.
Spider Nut Removal tool:
PU-50578
TORQUE
Spider Nut:
300 ft-lb (407 Nm)
Drive Clutch Holding Fixture:
2871358-B
r
5. Install the spring and the spring spacer
6. Place the drive clutch in a clutch compression tool.
5.12
t
in a vise and 7. Install the six fasteners
cover. Torque fasteners to specification.
u
and
8. Once the clutch is fully assembled, ensure the
reference marks you made on the stationary sheave,
moveable sheave, spider and cover are properly
aligned.
e
.
Failure to assemble the clutch exactly how it was taken
apart will cause the clutch to be out of balance and
q
TORQUE
Drive Clutch Cover Fasteners:
9 ft-lb (12 Nm)
IMPORTANT
require clutch replacement.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
retaining the drive clutch
© Copyright Polaris Industries Inc.