Polaris RZR XP Service Manual page 499

q
11. Install rear ROPS onto the vehicle. Loosely install
M10 x 1.5 x 45 screws (PN 7519906)
1.5 flanged Nyloc nuts (PN 7520117)
mounts. Loosely install M10 x 1.5 x 45 screws (PN
a
7519906) and M10 x 1.5 Nyloc nuts (PN 7547746)
k
into the rear mounts.
12. Install ROPS seat belt mount
1.5 x 75 screws (PN 7520488)
1(
Nyloc nuts (PN 7520117)
i
13. Install front ROPS onto the vehicle. Loosely install
M10 x 1.5 x 45 screws (PN 7519906)
1.5 Nyloc nuts (PN 7547746)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
14. Install M10 x 1.5 x 45 screws (PN 5267751-458)
a
and M10 x
1(
into the front
15. Torque all other ROPS fasteners except for the rear
y
. Loosely install M10 x
d
and M10 x 1.5
into the mounts.
16. Torque fasteners
17. Reinstall the rear ROPS cover panels on both sides.
a
and M10 x
k
into each mount.
from the underside to retain the rear ROPS mounts to
the cargo box. Only tighten finger tight at this time.
ROPS mount fasteners in step 15 to specification.
TORQUE
ROPS fasteners:
40 ft-lb (54 Nm)
a
from step 15 to specification.
TORQUE
Rear ROPS Mount fasteners:
35 ft-lb (47 Nm)
Torque fasteners to specification.
TORQUE
ROPS Cover Panel fasteners:
14 in-lb (2 Nm)
BODY / FRAME
a
11
11.35