Front Fender Flair Removal; Front Body Removal - Polaris RZR XP Service Manual

BODY / FRAME
3. Remove two push pins
4. Disconnect the AWD switch, headlight switch, mode
switch and ignition switch.
Pay attention to switch locations and electrical harness
5. Remove glove box and passenger grab handle.
6. Remove four lower dash fasteners
lower dash by pulling rearward to disengage clips.

FRONT FENDER FLAIR REMOVAL

Remove the Five T-40 torx screws and one push pin.
q
Remove fender flairs from the dash assembly.
11.20
e
retaining display bezel
NOTE
routing.
t
and remove
r
.

FRONT BODY REMOVAL

1. Remove the hood, upper dash, lower dash, and
fender flairs.
2. Remove the three fasteners
3. Remove two fasteners
fender.
4. Remove the right side ROPS by removing its
fasteners . Refer to Cab Frame Assembly page 11.4
for reinstallation and torque info.
5. Remove the front fender.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
w
retaining the fender.
e
securing door striker to
© Copyright Polaris Industries Inc.