Polaris RZR XP Service Manual page 100

ENGINE / COOLING SYSTEM
5. Remove two fasteners
shield above O2 sensor.
6. Remove the four fasteners
shield above the valve cover.
Front fasteners are plastic rivets and rear fasteners are
bolt/washer/nut.
7. Remove the two fasteners
to the exhaust pipe / turbo joint.
3.18
r
retaining the engine heat
t
retaining the heat
NOTE
y
retaining the heat shield
8. Remove the four fasteners
pipe to the turbocharger.
9. Remove the exhaust pipe from the chassis.
10. If replacing the exhaust pipe, remove the heat
shielding from the pipe.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
u
retaining the exhaust
© Copyright Polaris Industries Inc.