ENGINE REMOVAL
1. Disconnect the battery.
2. Drain coolant and engine oil. SeeEngine Oil and Filter
Change page 2.29 and Coolant Flush page
3. Remove the ROPS.
WARNING
The ROPS/roof should only be serviced by a certified
Polaris dealer.
4. Remove rear fender flairs and fenders.
5. Remove rear fascia.
6. Remove cargo box.
7. Remove cargo box brackets. exhaust shields on
passenger side, wire/hose clamps on driver's side.
8. Disconnect ignition coil.
9. Disconnect and remove the oxygen sensor
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
10. Remove three fasteners
exhaust pipe.
.
11. Remove two fasteners
shield above O2 sensor.
12. Remove the four fasteners
w
.
shield above the valve cover.
Front fasteners are plastic rivets and rear fasteners are
ENGINE / COOLING SYSTEM
e
retaining muffler to the
r
retaining the engine heat
t
retaining the heat
NOTE
bolt/washer/nut.
3
3.49