Polaris RZR XP Service Manual page 134

ENGINE / COOLING SYSTEM
29. Remove zip ties retaining fuel lines and harnesses to
intake manifold.
30. Loosen and remove clamps
manifold to engine. Remove lower manifold mounting
2)
bolt (to trans mount bracket).
31. Remove intake manifold and throttle body as
assembly.
32. Disconnect the starter wiring.
33. Remove PVT hoses and outer cover.
34. Remove secondary clutch, belt, and primary clutch.
3.52
1 (
retaining intake
35. Support the bottom side of the engine with wood
blocks or from the top side with an engine lift.
36. Remove the three allen screws
retaining inner cover to engine.
37. Remove fasteners
transmission.
38. Remove fasteners retaining inner cover to engine/
trans joint. Discard PVT inner cover o-ring around the
crankshaft snout.
2#2$
39. Remove fasteners
mount bracket.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
2!
and washers
retaining inner cover
retaining engine to the engine
© Copyright Polaris Industries Inc.
2@
to