4. Adjust the door until the front latch is centered both
vertically and horizontally in the striker bracket, as
shown.
NOTICE
If it is difficult to center vertically and horizontally, loosen
striker assembly fasteners
Torque striker fasteners once aligned.
TORQUE
Striker Fasteners:
8 ft-lb (11 Nm)
5. Holding the door in position, tighten the top hinge
e
bracket M8 fasteners
r
. Torque to specification.
TORQUE
Door Hinge Fasteners:
8 ft-lb (11 Nm)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
w
for extra adjustment.
and then bottom fasteners
6. Install the door panel onto the door frame. Torque
fasteners to specification.
TORQUE
Door Panel Fasteners:
22 in-lb (2 Nm)
BODY / FRAME
11
11.25