Drive Clutch Disassembly / Inspection; Shift Weight Inspection; Slider Plate Inspection; Drive Clutch Disassembly - Polaris RZR XP Service Manual

PVT SYSTEM

DRIVE CLUTCH DISASSEMBLY /

INSPECTION

SHIFT WEIGHT INSPECTION

• Remove the fasteners retaining the shift weights.
• Inspect the contact surface of the weights. Some wear
is normal but if the weights start cupping on the contact
surface, then they should be replaced.
• Install weights and torque fasteners to specification.
TORQUE
Shift Weight Fasteners:
20 in-lb (2 Nm)
5.8

SLIDER PLATE INSPECTION

Inspect the contact surface of the three slider plates.
Some wear is normal but if the slider plates start to
groove, then they should be replaced.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.