Collecting Qc Data - Beckman Coulter CytoFLEX SRT Instructions For Use Manual

Instrument Quality Control and Standardization
Quality Control

Collecting QC Data

QC data and reports are saved by default. Select
change the default save settings or modify the file path these files are saved to.
1
Double-click
a. Ensure that the
green.
b. If the icon is not green, ensure that the Sorter USB is securely connected to the Workstation
and restart the Workstation.
2
Verify the detector configuration. Refer to
Configuration
NOTE
Ensure that the instrument configuration is properly configured for the QC experiment. The QC
experiment may not be completed or may end in erroneous results if incorrect settings are chosen.
Beckman Coulter recommends using the factory configuration and ensuring that the proper optical
filters are in place.
3
Verify the laser settings. Refer to
4
Select
Initialize
NOTE
Skip this step if the instrument has already been in the initialized state.
4-10
to start the CytExpert SRT software.
icon on the Status Bar near the bottom-left side of the display is
Connected
in CHAPTER 5, Sorting.
Laser Settings
to put the instrument in the initialized state.
QC/Standardization Setting
Verifying, Selecting, Editing, and Creating Detector
in CHAPTER 5, Sorting.
in the Settings menu to
C37808AC