Save Master - Fastus LS Series User Manual

Profile Settings
5.5.2

Save Master

Register the acquired profile as the master image.
The correction functions are set with the registered master image as the reference.
You can save one master image for each bank.
Tips
When you change the reference coordinates for the height, position, or tilt correction and when you change
the correction procedure, you have to register the master image again. If you do not register the master
image, the correction functions will not operate correctly.
5-18
Ramco National 800-280-6933 | nsales@ramcoi.com www.Optex-Ramco.com