Camera Settings - Fastus LS Series User Manual

4.4.3

Camera Settings

This section explains the details of the camera setup screen.
Reference
For details on the camera settings, see "5.4 Camera Settings."
(1)
(2)
(4)
Number Display item
Updates the display area
(1) Refresh
details to the latest status.
Specifys the camera range.
Narrow the range to reduce
(2) Rect
the time required to capture
the image.
Automatically sets the
(4) Auto Adjust shutter time to the
optimum value.
Expand or shrink the
(5) Scaling
display area.
Displays the camera image
Camera
(6)
captured when "Refresh"
image
was clicked.
Displays the received
Received
light waveform at the
(7) light
position specified on the
waveform
camera image.
Ramco National
Description
When you click this button, the latest camera image is acquired.
(If the communication speed is slow, it may take time to acquire
the image.) When the Refresh button is pressed while the
process is on going, the process will be stopped.
When you click this button, a white, square frame
indicating the range will be drawn on the camera image
(6). Adjust the range using the mouse by dragging the
sides and corners of the frame.
Click this button to automatically set the shutter time.
• Before automatic adjustment, set the actual measurement target in place
and do not move the target during adjustment. (If "Trigger Mode" is set to
any value other than "Continuous," apply the trigger.)
• After automatic adjustment, "Mode" will be changed to "Hi-rezo."
The camera image is displayed here.
• When "Mode" is set to "HDR," the HDR shutter image is
displayed.
• When "Mode" is set to "NR", the image when the laser is
off is displayed.
View the received light waveform (dispersion of the amount of received
light in the height direction) at a specific position (indicated by the dotted
red line) by clicking that position on the camera image.
• Blue: Threshold
• Red: Reject Level
800-280-6933 | nsales@ramcoi.com
Operation
Expand the display area in the vertical direction.
Shrink the display area in the vertical direction.
Expand the display area in the horizontal direction.
Shrink the display area in the horizontal direction.
Setup Procedure
(5)
(6)
(7)
(8)
(9)
4-17
www.Optex-Ramco.com