Calculation Settings - Fastus LS Series User Manual

Setup Procedure
4.4.6

Calculation Settings

This section explains the details of the calculation setup screen.
Reference
For details on the calculation settings, see "5.7 Calculation Settings."
(1)
(2)
(3)
Number Display item
Selects the waveform
(1) series
display targets.
(2) target Selects the setting target.
Displays the measured
Measured
(3) result of the current
result
setting target.
Parameter
(4) Displays the settings.
display area
Expand or shrink the
(5) Scaling
measured result graph.
Measured Displays the measured
(6)
result graph results as a graph.
4-22
Ramco National
(4)
Description
The measured values of the areas whose check boxes you
select will be displayed on the graph.
Select the setting target from "Area1," "Area2," "Area3,"
"Area4," "Calc1," and "Calc2." The details that you can set
vary depending on whether the target is an area or a
calculation.
Displays the settings based on the selected details.
If you selected "Calc1" or "Calc2" with "target" (2), set the
details of the calculation.
-
800-280-6933 | nsales@ramcoi.com
Operation
Expand the display area in the vertical direction.
Shrink the display area in the vertical direction.
Expand the display area along the time axis.
Shrink the display area along the time axis.
(5)
(6)
www.Optex-Ramco.com