Setting Acquisition And Change Commands; Communication Command Examples - Fastus LS Series User Manual

6.5 Setting Acquisition and Change Commands

This section explains the communication commands related to various settings.
6.5.1

Communication Command Examples

Setting acquisition command
z z
● When acquiring the current camera mode
• Sent command
Command 02
Description STX
• Received command
You can see that the camera mode is 0000 = "Hi-res" mode.
Command 02
Description STX
Send setting command
z z
● When changing the shutter time to 5000 μs (5 ms)
• Sent command (Change setting)
Enter 5000/5 = 1000 as a hexadecimal value for the shutter speed.
Command 02
Description STX
• Received command
When the setting is changed correctly, the sent command is returned as-is.
Command 02
Description STX
• Sent command (writing settings to EEPROM)
Command 02
Description STX
• Received command
Command 02
Description STX
Tips
The settings willl be changed when the LS series receives the command. However, the changed settings will
be erased when the power is turned off. To keep the settings, send the command to write them to EEPROM.
Ramco National
00 20 1b
Length Command
01 20 1b
Length Command
01 20 0e
Length Command
01 20 0e
Length Command
01 00 05
Length Command
01 00 05
Length Command
800-280-6933 | nsales@ramcoi.com
Setting Acquisition and Change Commands
03 3B
ETX Sum
00 00 03
Camera mode ETX
03 E8 03
Shutter speed ETX
03 2F
ETX Sum
00 00 03
Bank number ETX
03 04
ETX Sum
3A
Sum
C4
Sum
C4
Sum
www.Optex-Ramco.com
6-9