Quick Setup
2.2.3
Initialize Settings
This section describes how to initialize settings.
You can initialize one bank at a time or all banks at the same time.
● Related page
Sensor screen
Setup software
Tips
If you select "All" on the initialization menu, the LS sensor will restart.
2-6
Ramco National
Screen image
800-280-6933 | nsales@ramcoi.com
Operation
To initialize settings, on the "Other" tab,
display the "Initialize" menu, select "Bank"
or "All," and then press the
button.
When the confirmation screen displays
the message "Reset to factory initial
value.," press the
"SET" button again
to execute initialization.
On the measurement screen, click
"Common Setup." The Common Setup
screen displays. Click the target that you
want to initialize, and click "Bank Clear."
A confirmation dialog displays. Click "Yes"
to execute initialization.
www.Optex-Ramco.com
"SET"