2.2.2
Return to Main Menu/Measurement Screen
When you have finished configuring settings or when you are not sure what menu you are currently on, you
can follow the procedures below to return to the main menu (the measurement screen).
● Related page
Sensor screen
Setup software
Ramco National
Screen image
800-280-6933 | nsales@ramcoi.com
Operation
Hold down the
"EXIT" button.
* For the "In/Trig" and "Other" tab,
you need to select the tab, and then
hold down the "SET" button to return
to the main menu.
Click "Back to Measure."
www.Optex-Ramco.com
Quick Setup
2-5