Ls-Navigator Screen And Operating Method; Start Ls-Navigator; Main Screen (Measurement Screen) - Fastus LS Series User Manual

4.3 LS-Navigator Screen and Operating Method

4.3.1

Start LS-Navigator

Double-click the icon to start the program.
4.3.2

Main Screen (Measurement Screen)

This section explains the details of the main screen (measurement screen).
(1) (2)
(17)
(16)
(15)
(14)
Number Display item
(1) File Display the File menu.
(2)
View Display the View menu.
(3) Comm Display the Comm menu.
(4) Help Display the Help menu.
Turn trigger operation on
(5) Trigger
or off.
Reset the measured
(6) Reset
value.
Ramco National
(3) (4) (5) (6)
(13) (12)
Description
• New
• Open
• Save
• eXit
• Measure
• Settings
• Common Settings Displays the common screen.
• Send Param Writes settings to the sensor head.
• Receive Param Receives communication settings from the
• Connect
• Disconnect
• About 'LS-Navigator'
Click to switch the trigger between on and off.
Click to reset.
800-280-6933 | nsales@ramcoi.com
LS-Navigator Screen and Operating Method
(7) (8)
(11)
Operation
Creates a new settings file.
Displays the "Open File" dialog box, to open an
existing file.
Displays the "Save As" dialog box, to save
the current settings to a file.
Exit LS-Navigator.
Displays the measurement screen.
Displays the "Inputs/Trigger," "Camera,"
"Profile," "Area," "Operation," or "Outputs"
setting screen.
sensor head.
Connect to the sensor head.
Disconnect from the sensor head.
Display the software version information.
(9)
(10)
4-11
www.Optex-Ramco.com