Common Settings; Banks; Baud Rate - Fastus LS Series User Manual

Common Settings

5.9 Common Settings
5.9.1

Banks

The LS series stores measurement conditions in "banks." You can switch between banks according to the
details to measure.
You can use the sensor or communication to switch between banks.
Bank switch
z z
● In/Para
You can use the sensor screen and input terminals to switch between banks.
● Comm
You can use communication to switch between banks. If you use LS-Navigator to switch between
banks, this setting will automatically be switched to "Comm."
Switching between banks when "Bank switch" is set to "In/Para"
z z
When "Bank switch" is set to "In/Para," set the input terminals as shown in the following table in order to
switch between banks.
You can use the "Bank" setting of the sensor to switch between banks when there are terminals that are
not assigned to bank 1, 2, or 3.
Bank input 1
5.9.2

Baud rate

Set the communication speed.
The LS series communication speed can only be changed from the sensor.
Reference
For details on the communication speed setting, see "6.1 Communication Specifications."
5-38
Ramco National
Bank input 2
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
800-280-6933 | nsales@ramcoi.com
Bank input 3 Bank
OFF 1
OFF 2
OFF 3
OFF 4
ON 5
ON 6
ON 7
ON 8
www.Optex-Ramco.com