Table of Contents
Advertisement
3.4 Graph/Calc
The measured results of each area are displayed as a graph.
You can also set calculation functions for adding or subtracting area measured results.
You can set up to two calculation formulas in the format
(calculation target 2)
Example: If calculation target 1 is "area 1," calculation target 2 is "area 2," and the operator is "+," the
calculation formula will be:
(area 1) + (area 2)
Table items marked with "Y" in the "Bank" column can be set for each bank. In the same manner, items
that have an "N" for their bank are shared between all banks.
Graph/Calc screen
z
z
This screen shows stored measurement results in graph form.
Reference
See "5.3 Storage Settings".
Ramco National
.
.
800-280-6933 | nsales@ramcoi.com
(calculation target 1) (operator)
Graph/Calc
3-17
www.Optex-Ramco.com
Advertisement
Table of Contents
