Laser Emission And Measurement Ranges - Fastus LS Series User Manual

When using the sensor, never look into the laser exposure window (5). Looking directly at the laser
beam may lead to loss of eyesight.
Put the rubber cap on the connector that is not used to protect from dust and water.
Note
When using the sensor, do not cover the laser exposure window (5) or the laser light reception window (6).
1.3.2

Laser Emission and Measurement Ranges

The laser emission and measurement ranges of this product are shown below.
 Laser emission range
0 mm
75 mm
100 mm
125 mm
Approximately 32 mm
Ramco National
Warning
Warning
0 mm
75 mm
100 mm
125 mm
800-280-6933 | nsales@ramcoi.com
Names and Functions of Parts
 Measurement range
17 mm
22 mm
27 mm
www.Optex-Ramco.com
1-5