Other - Fastus LS Series User Manual

.Main Screen
3.2.4

Other

Setting item Bank Setting value/default value
Bank switch N Select how to change between banks.
In/Para
Comm
Bank N Change the bank. The display details vary depending on the settings of the input
terminals.
The bank is determined by the details of this setting and the status of the input
terminals.
The condition to enable this function is: Bank switch: In/Para.
Input terminal settings
-
Input terminal settings
1, 3, 5, 7
2, 4, 6, 8
Input terminal settings
1, 2, 5, 6
3, 4, 7, 8
Input terminal settings
1, 5
2, 6
3, 7
4, 8
Input terminal settings
1, 2, 3, 4
5, 6, 7, 8
Input terminal settings
1, 3
2, 4
5, 7
6, 8
Input terminal settings
1, 2
3-8
Ramco National
Sensor operations or the input terminals will be used to
change between banks.
Communication (including LS-Navigator) will be used to
change between banks.
IN1: BANK1
IN2: BANK2
IN3: BANK3
You cannot switch the bank from the sensor.
IN1: Reset
IN2: BANK2
IN3: BANK3
The bank is changed to number 1, 3, 5, or 7.
The bank is changed to number 2, 4, 6, or 8.
IN1: BANK1
IN2: Hold
IN3: BANK3
The bank is changed to number 1, 2, 5, or 6.
The bank is changed to number 3, 4, 7, or 8.
IN1: Reset
IN2: Hold
IN3: BANK3
The bank is changed to number 1 or 5.
The bank is changed to number 2 or 6.
The bank is changed to number 3 or 7.
The bank is changed to number 4 or 8.
IN1: BANK1
IN2: BANK2
IN3: Trigger
The bank is changed to number 1, 2, 3, or 4.
The bank is changed to number 5, 6, 7, or 8.
IN1: Reset
IN2: BANK2
IN3: Trigger
The bank is changed to number 1 or 3.
The bank is changed to number 2 or 4.
The bank is changed to number 5 or 7.
The bank is changed to number 6 or 8.
IN1: BANK1
IN2: Hold
IN3: Trigger
The bank is changed to number 1 or 2.
800-280-6933 | nsales@ramcoi.com
General description
www.Optex-Ramco.com