How To Change Settings - Fastus LS Series User Manual

LS-Navigator Screen and Operating Method
4.3.4

How to Change Settings

Writing settings
z z
Setting changes are immediately applied to operation, but the changed details are cleared when the
power is turned off.
You can confirm the changed settings by clicking "Send Param" in the upper left of the screen.
Alternatively, you can confirm the settings when configuring measurement settings by clicking "Send
PARAM" in the bottom right of the "Outputs" setup screen.
If you attempt to exit the software without first confirming the settings, a confirmation dialog box will be
displayed.
4-14
Ramco National 800-280-6933 | nsales@ramcoi.com www.Optex-Ramco.com