4.2.3
Settings for High-speed Communication
To enable high-speed communication with the LS, we recommend that you configure the settings as shown
below.
However, configuring the settings as shown here will increase load on the computer during communication. If
operation becomes unstable, return the settings to their previous values.
Windows
XP
®
z
z
1
Open "Control Panel."
Click the [Start] button, and then click [Control
Panel].
2
Open the "Performance and
Maintenance" category.
Click "Performance and Maintenance."
3
Open the "System" control panel.
Click [System].
Ramco National
800-280-6933 | nsales@ramcoi.com
Software Setup
4-7
www.Optex-Ramco.com