Table of Contents
Advertisement
Sensor Screen
3.1 Sensor Screen
3.1.1
Details of the Screen
This section explains the details of the screen display.
Number
Display item
(1)
Main screen
(2)
Tab
(3)
Setting menu
Setting menu
(4)
(selected)
(5)
Parameter
(6)
Bank number
(7)
Output
(8)
Hold input
(9)
Storage function
(10)
Cursor
(11)
Sampling period
3-2
Ramco National
(1)
(2)
(3)
(4)
(6)
(7)
Description
The camera screen, profile waveform,
and set area are displayed here.
The menu categories are displayed
here. You can also select this part.
The setting menu is displayed here.
Three settings are displayed at one
time.
When a setting is selected, the color
changes.
The parameters for the settings are
displayed here.
The current bank number is displayed
here.
The control output statuses are
displayed here in the order—from the
left—control output 1, control output 2,
control output 3.
When the input is being held, an "H" is
displayed here.
The storage function operation status is
displayed here.
A cursor that indicates the direction that
the screen can move in is displayed
here.
The sampling period is displayed here.
The unit is "ms."
800-280-6933 | nsales@ramcoi.com
(5)
(8)
(9)
(10)
(11)
Operation
—
Move the cursor to the tab, and then
press the
"SET" button to switch
between the tabs in order.
When not selected: Black
When selected: Blue
—
When selected: White
When setting the parameter: Yellow
When item selected: White
When setting the parameter: Yellow
—
When output is off: Black
When output is on: Orange
When input is being held: "H"
displayed in yellow
Trigger standby: Green
Storing: Yellow
When the screen can move up: ▲
When the screen can move down: ▼
When the screen can move up and down: ▲▼
When the keys are locked: L
—
www.Optex-Ramco.com
Advertisement
Table of Contents
