Uninstallation Procedure - Fastus LS Series User Manual

Software Setup
5
Open the "Advanced Settings for COM
XX" dialog.
Click the [Port Settings] tab, and then click
[Advanced].
6
Change the "Latency Timer" setting.
Select "1" from the "Latency Timer" list, and
then click [OK].
Note
If changing this setting causes a malfunction
such as the software stopping, change the
"Latency Timer" setting to a larger value.
4.2.4

Uninstallation Procedure

This section explains how to uninstall the setup software.
Tips
• Exit the setup software before uninstalling.
1
Delete the folder where the setup software install file is saved.
Delete the entire folder where the "LS-Navigator" install file is saved.
4-10
Ramco National 800-280-6933 | nsales@ramcoi.com www.Optex-Ramco.com