Setting
3.3 Setting
This section explains the setting items on the setting screen.
The setting screen has three sets of settings: "Camera," "Profile," and "Area."
While the setting screen is displayed, judgment output (control output) is stopped and out-of-range
analog current output is generated (approximately 24 mA).
Table items marked with "Y" in the "Bank" column can be set for each bank. In the same manner, items
that have an "N" for their bank are shared between all banks.
3.3.1
Camera
Use the camera settings to configure camera (sampling) conditions such as the camera mode, the camera
area, and the exposure condition in order to match the measurement target and environment.
Camera screen
z
z
3-10
Ramco National
800-280-6933 | nsales@ramcoi.com
www.Optex-Ramco.com