Area Settings - Fastus LS Series User Manual

4.4.5

Area Settings

This section explains the details of the area setup screen.
Reference
For details on the area settings, see "5.6 Area Settings."
(1)
(4)
(6)
(7)
Number Display item
Click this button to
(1) Refresh perform continuous
updating of the profile.
Expand or shrink the
(2) Scaling
display area.
Sets the measurement
(3)
Measurement function of the selected
area.
Area
(4)
Select the area to set.
Settings
Displays the profile.
(5) Display area You can configure areas
by dragging them.
Define if you apply
(6) Correction correction on this area or
not.
Define if you show
(7) View Master registered master profile
or not.
Ramco National
Description
When you click this button, continuous updating of the
profile will start.
Select the measurement function from the list.
Detailed items may be displayed according to the selected
function.
To select the area that you want to set, click its button.
Drag the areas to configure them.
Expand and shrink areas by dragging their corners and
move areas by dragging them (click in the area and then
drag it).
Click a different area to set that area as the target.
• OFF
• ON
By checking at check box, the registered profile will be
shown in Blue color.
800-280-6933 | nsales@ramcoi.com
Operation
Expand the display area in the vertical direction.
Shrink the display area in the vertical direction.
Expand the display area in the horizontal direction.
Shrink the display area in the horizontal direction.
The position and height correction will not be
used.
The position and height correction will be used.
Setup Procedure
(2)
(3)
(5)
4-21
www.Optex-Ramco.com