Profile Settings - Fastus LS Series User Manual

4.4.4 Profile Settings
This section explains the details of the profile setup screen.
Reference
For details on the profile settings, see "5.5 Profile Settings."
Setting the waveform extraction
(1)
(4)
(5)
Setting the origin and tilt correction
(1)
(4)
(5)
Number Display item
(1) Refresh Updates the profile.
Sets the parameters
(2) Waveform related to waveform
extraction.
Sets the parameters
related to position
(3) Area correction, height
correction, and tilt
correction.
Registers the profile as
(4) Register
the master image.
Ramco National
Description
Click this button to update the screen to the latest profile.
Click to display the parameters related to waveform
extraction (5).
Click to display the parameters related to position
correction, height correction, and tilt correction (5).
Click to aquire a new profile and register as the master
image.
You must register a new master image when you change
the correction settings.
800-280-6933 | nsales@ramcoi.com
Setup Procedure
(2)
(3)
(6)
(7)
Operation
www.Optex-Ramco.com
4-19