Install The Software - Fastus LS Series User Manual

4
Open the "Device Driver Installation
Wizard."
Click [Extract].
5
Proceed with the driver installation.
Click [Next].
6
Complete the driver installation.
Click [Finish].
This completes the driver installation.
4.2.2

Install the Software

This section explains the setup software installation procedure.
1
Insert the setup software user's manual CD-ROM.
Insert the CD-ROM into the computer's CD-ROM drive.
2
Double-click the CD-ROM drive icon.
Double-click the icon of the drive with the CD-ROM inserted to open it.
3
Create a folder to save the setup software.
Create a folder on your computer to save the LS-Navigator setup software.
Ramco National 800-280-6933 | nsales@ramcoi.com
Software Setup
4-5
www.Optex-Ramco.com