Table of Contents
Advertisement
Output Settings
5.8.3
Out action
Set the output operation.
[Setting target:] Outputs 1 to 3
Normal
z
z
The output turns on when the measured value is outside of
the threshold range.
1shot
z
z
The output turns on for the specified output time when the
measured value is outside the threshold range.
Judgment will be performed for each measurement.
If the output time is longer than the sampling period, the
output will continue.
OnDelay
z
z
The output turns on after the specified output time elapses
when the measured value is outside the threshold range.
The output will not be turned on when the output time is
short.
Ready
z
z
Output turns on when the trigger input can be received.
Tips
With the "Ready" setting, the output does not indicate the measured value.
Strobe
z
z
Each time that the measured value is updated, the output turns on just for the output time.
If the output time is longer than the sampling period, the output turns off after the output time elapses
and turns on when the next update occurs.
Tips
With the "Strobe" setting, the output does not indicate the measured value.
5-34
Ramco National
800-280-6933 | nsales@ramcoi.com
Upper limit
Output
ON
OFF
ON
OFF
ON
OFF
Upper limit
ON
OFF
Output
ON
OFF
ON
OFF
Output time
ON
Upper limit
OFF
ON
OFF
ON
Output
OFF
Output time
www.Optex-Ramco.com
Advertisement
Table of Contents
