Table of Contents
Advertisement
4.3.3
Common Setup
This section explains the details of the common setup screen.
(1)
(4)
(6)
(8)
Number Display item
Set the port for
(1)
Port
communication.
Set the communication
(2)
Baudrate
baud rate.
Bank
Select how to switch
(3)
Change
between banks.
(4)
On Timing
Set the output behavior.
Set the direction in Z-axis
(5)
Axis Dir
to increase and decrease
the value.
Set the measured result
(6)
Unit
display unit.
Set the number of digits
(7)
Resolution
of the measured result to
display.
Set the display language
(8)
Language
of "LS-Navigator."
Click this button to
(9)
Reset
initialize the settings.
Click this button to copy
(10) Bank Copy
the details of the selected
bank.
Ramco National
(9)
Description
Select from the list the port to use for communication. The
ports that are currently connected to the computer are
displayed automatically.
Select from "9600bps," "19.2kbps," "38.4kbps,"
"57.6kbps," "115kbps," "230kbps," "460kbps," "921kbps,"
"2Mbps," and "4Mbps." (Default: "2Mbps.")
Select the bank switch method from "Body" and "Comm."
If you use LS-Navigator to switch the bank, this setting will
automatically be changed to "Comm."
Select the output ON/OFF behavior for "Out Range" or "In
Range". Detailed explanations are at [5.8.1 Out target].
Set which side's values to use as positive with the
measurement center used as the center.
Select the display unit from "mm" and "μm."
Select from "1mm," "0.1mm," "0.01mm," and "0.001mm."
Select the display language of "LS-Navigator."
You can select from "en" (English) and "ja" (Japanese).
(Even if you change this setting, the sensor display will not
be changed.)
"Bank Clear:" Click this button to initialize the settings of
the current bank.
"Reset :" Click this button to return all the settings to their
factory default values. When you execute this operation,
the sensor will restart, so communication will be
disconnected.
Click this button to copy the bank settings to a different
bank. When you click this button, a setup menu for
selecting the copy source and copy target will be
displayed.
800-280-6933 | nsales@ramcoi.com
LS-Navigator Screen and Operating Method
(10)
Operation
(2)
(3)
(5)
(7)
4-13
www.Optex-Ramco.com
Advertisement
Table of Contents
