To Use The Shading Correction Function - JAI GOX-2402M-PGE User Manual

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Cautions:
For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is
l
limited to 8 times the amount of gain before correction. (The amount of gain cannot be
increased to more than 8 times the amount of gain from before correction.)
If the area in the screen with the highest brightness level is 175 LSB or less (during 10-bit
l
video output), proper correction is not possible.

To Use the Shading Correction Function

Configure the settings as follows.
Item
ShadingCorrectionMode
ShadingMode
Display a white chart under a uniform light, and execute PerformShadingCalibration.
Notes:
After shading correction is executed, the shading correction value is automatically saved to
l
the user area selected in ShadingMode.
The PerformShadingCalibration command cannot be executed under the following
l
conditions. (An error also occurs when ShadingMode is set to Off).
- When outputting no image.
- When outputting TestPattern.
- When ExposureAuto is set to Continuous (AcquisitionControl)
- When in SequencerMode
- When GainAuto is set to Continuous (AnalogControl)
Setting Value
FlatShading,
ColorShading
User1, User2, User3,
Off
(Sequencer Function)
User Manual (Ver. 1.5) - Main Functions
Select the shading correction mode.
Select the user area to which to save the shading
correction value.
- 68 -
Description