Table of Contents
Advertisement
GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
LUT (Lookup Table)
Related Setting Items:
The LUT function is used to generate a non-linear mapping between signal values captured on the
sensor and those that are output from the camera. You can specify the output curve using 256 setting
points (indexes).
To Use the LUT Function
Configure the settings as follows.
Setting Value /
Item
Selectable Range
JAI LUT
LUT
Mode
LUT
Selector
Color Model: Red,
(Color
Green, Blue
models
only)
LUT Index 0 ~ 255
LUT Value 0 ~ 4095
Note: For the GO-2400C-PGE, the same characteristic curve is configured for R, G, and B. For
the GO-2401C-PGE, separate characteristic curves are configured for R, G, and B.
LUTControl
Use LUT.
Select the LUT channel to control.
Select the LUT index to configure. Indexes represent the possible pixel values
captured on the sensor, from the lowest value (Index 0) to the highest (Index
255). For example, Index 0 represents a full black pixel and Index 255
represents a full white pixel.
Set the LUT output value for the selected index.
Description
- 54 -
Main Functions
Advertisement
Table of Contents
