Transferring Configuration Files - YASKAWA YRC1000 Startup Manual

VERSION 5.3.0
At the Reset? prompt tap YES. Wait for the flash reset to complete and the pendant to beep. This process
b
takes up to 60 seconds to complete. The arrow buttons are disabled until the reset completes.

TRANSFERRING CONFIGURATION FILES

This section assumes that your Yaskawa pendant is still booted in Maintenance Mode and that you have selected
the Safety Security Mode.
Follow these steps to load the Forge MotoPlus APL.
1
From the Main Menu, tap MotoPlus APL, then tap FOLDER to select the folder to load files from.
a
Tap the forge-os folder to open it, then tap to open the yaskawa folder. At the top of the screen, the
b
TARGET FOLDER should be yaskawa.
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
42