YASKAWA YRC1000 Startup Manual page 43

VERSION 5.3.0
From the Main Menu, tap MotoPlus APL, then tap LOAD (USER APPLICATION).
c
Highlight the MotoPlusYRC1....out file on the USB drive and press the SELECT button.
d
Verify that a small black star icon appears to the left of the file name and press the ENTER button on the
e
pendant keypad.
At the Load prompt tap YES. If asked to overwrite an existing file, select YES.
f
Power off the Yaskawa controller and wait 10 seconds.
2
Power up the Yaskawa controller (not in Maintenance Mode).
3
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
43