YASKAWA YRC1000 Startup Manual page 34

VERSION 5.3.0
Set parameters S4C0287 - S4C0295.
5
From the PARAMETER menu, select S4C.
a
Set parameter S4C0287 to 511.
b
Set parameters S4C0288 - S4C0295 to 0.
c
(Optional): If your controller has the SETUP > SPEED OVERRIDE SETTING menu, you can check if the
6
parameters were correctly set:
Verify that Setting Method = I/O.
a
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
34