YASKAWA YRC1000 Startup Manual page 28
Forge/os 5
Hide thumbs
Also See for YRC1000:
- Instructions manual (493 pages) ,
- Operator's manual (198 pages) ,
- Safety requirements (14 pages)
Table of Contents
Advertisement
VERSION 5.3.0
Select the robot Controller Model, then select the Robot Model. You can fill in the other information later.
4
Insert a USB flash drive into the IPC as instructed on the screen. Use an empty flash drive with at least 2GB of
5
storage.
Tip: Do not connect the USB flash drive to the READY pendant.
Tap Start Transfer and wait for it to finish.
6
Remove the USB flash drive when prompted.
7
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
28
Advertisement
Table of Contents
