YASKAWA YRC1000 Startup Manual page 75

VERSION 5.3.0
Check the Network settings in Forge/OS and set them as you want.
2
On the Settings main screen, tap Network.
a
The table below lists the available network interfaces on your IPC. By default, the first interface is for the
b
READY pendant. You can't edit the pendant's interface in Forge/OS. Select another interface and tap Edit
to see the network settings.
Change the network interface to match the settings in the image below. Connect robots and other devices
c
to this interface through an Ethernet switch.
Tap SAVE.
d
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
75